Fast Flow Electric Hydraulic Power Units
  Fast Facts
Horse Power
30, 60, or 100 HP
Operating Pressure
2800 - 3000 PSI
Hydraulic Flow
Up to 40 GPM
Hydraulic Tank
5 Gallon Cube Cooler
Electric Input
230/480 VAC
Weight
2800 LBS & UP
Dimensions:
56" x 39" x 37"
Hydraulic Oil:
32 & 46 AW, 56 NS
Download Spec Sheet
Motor
• WEG Brand TEFC electric motor
• Continuous duty rated
• 1 Year motor warranty
• Ball bearings are standard
• Cast iron frame
• Exceeds ASTM B117 salt spray test
• Built in grease fitting and thermostat
Safety
• Control panel key switch
• Electric push button start and stop with toggle
• System flow thru hydraulic relief valve
• Non sparking electric motor fan
• Easy to read operation labeling & instructions
• Easy to read safety labeling
• Fully boxed frame tubing for damage protection
Hydraulics
• Single circuit variable flow hydraulic controls
• Low level hydraulic fluid shutdown
• Oversized hydraulic cooling system with fan
• Hydraulic oil filter with spin on cartridge
• Load compensating hydraulic controls
• 5000 PSI hydraulic gauges
• 5000 PSI screw together supply & return fittings
• Hydraulic oil level & temperature indicator
Other Features
• 100% Oil containment
• Double coated marine epoxy paint
• Motor mount vibration dampers
• Bolt holes in foot pads for permanent mounting
• Removable hydraulic tanks with clean out ports
• 60 or 100 GPM hydraulic cooler options
• 10" Fork lift boots
• Low point drain plugs
Available Options
• Fully custom hydraulic circuits, pressures & flows
• UL Certified explosion proof motors
• UL Certified explosion proof control panels
• Decreased footprint hydraulic cooling system
• Powder coated frame
• Integrated hydraulic hose reels
Hazardous working conditions require special
attention to details and the right equipment for safety. Fast Flow
electric power units have optional explosion proof electric motors,
connections and control panels to offer a total solution for your
work environment. Our hydraulic power units are proven in
dangerous environments such as oil & gas field operations  and
offshore work environments. 
  WEG Brand W22 TEFC Motors - Severe Duty and Explosion Proof
• 30 HP, 60 HP & 100 HP motors available
• Cast iron frame and high performance coating
• NEMA Premium Efficiency
• Lower total operating costs
• Efficiency certification by Department of Energy
• Lower operating noise level
• Voltage: 208-230/460 or 575 V @ 60 Hz
• Lower operating temperatures
• 2300 Max RPM
• Total enclosed fan unit - IP 54 rated 
• 1.15 or 1.25 Service factor
• Explosion proof meets UL and CSA standards
   
Severe Duty Motors
Explosion Proof Motors
© Copyright 2013 Fast Flow Pump All Rights Reserved
Fast Flow Pump • 9700 Hwy 63 • Moss Point MS 39562
Phone: 228.475.2468
Fax: 228.475.4898
Fast Flow, LLC and Fast Flow Pump manufactured pumps are protected under; 35 U.S.C., 37 C.F.R. and 18 U.S.C.  Fast Flow, LLC and Fast Flow manufactured pumps are covered by one or more of the following patents: United States Patent Number(s): 6,942,448; 7,442,003; 8,152,443; Other Patents Pending, Domestic and Foreign
228.475.2468
Fast Flow Pump
Submersible Pumps Hydraulic Power Systems