Revolutionary Fast Flow Bilge Pump
Discover one of the most important innovations in boat safety in recent history with the Fast Flow Emergency Bilge Pump.  Not to be confused with or to replace a conventional bilge pump, our revolutionaty safety pump is nothing short of a "life and property" saving device.

New Technology for Boating Safety - High Flow Rates
Though simple in design, Fast Flow emergency bilge pumps combine versatile capabilities with comparable power and dependability.  With its split impeller & split case design, the pump attaches directly to the propeller shaft, utilizing the power of your engine's drive system.  As long as the shaft is turning, your pump is working.  Designed to run dry continuously, it serves as a high volume air blower ventilating heat and fumes from the engine compartment.  When accidental flooding occurs, the pump begins immediately to remove the excess water.  Our patented "double suction" centrifugal pump will self prime and remove large amounts of water.

Easy to Install
Available in various sizes to fit most vessels, the Fast Flow emergency bilge pump can be installed without removing the shaft and is available in a hydraulic-operated model which can be mounted independent of the shaft, when accessibility is not available or shaft space is limited.

When running in dry mode, the Fast Flow pump works as a high-volume bower, ventilating heat and fumes from the engine room.  In the event that there's a large ingress of water in your vessel, this pump can easily remove everything that a standard bilge pump cannot.  For example, if there is a 4" hole in a vessel 2 feet below the water line, it will flood in at a rate of approximately 15,960 gallons per hour.  This can sink a vessel in a matter of minutes.  The smallest Fast Flow pump will pump 24,000 gallons per hour at 2,000 rpm, providing the utmost peace of mind that, should the need arise, our emergency bilge pump could save your boat - and your life.
     Fast Flow Bilge Pump Output (US)
Size
RPM
Flow Per
Minute
Hourly Flow
Discharge
Height
2 Inch
800
80 GPM
4800 GPH
8'
 
1200
180 GPM
9600 GPH
30'
 
2000
350 GPM
21,000 GPH
100'
3 Inch
600
210 GPM
12,600 GPH
8'
 
800
354 GPM
21,240 GPH
10'
 
1500
630 GPM
37,800 GPH
40'
     Fast Flow Bilge Pump Output (Metric)
Size
RPM
Flow Per
Minute
Hourly Flow
Discharge
Height
2 Inch
800
303 LPM
18,200 LPH
2 M
 
1200
605 LPM
36,300 LPH
4 M
 
2000
1325 LPM
79,500 LPH
30 M
3 Inch
600
795 LPM
47,700 LPH
2 M
 
800
1340 LPM
80,400 LPH
3 M
 
1500
2385 LPM
143,100 LPH
15 M
Fast Flow Bilge Pump Warranty
"Life Insurance for Your Boat"
Low Maintenance
Available in sizes to fit most vessels, the Fast Flow emergency bilge pump can be installed without removing the shaft.  It has a split impeller and case design that is easy to install.  The Fast Flow emergency bilge pump is relatively maintenance free.  It contains no mechanical seals, bearings, wear plates, gaskets, gears, belts, valves, filters, switches, rubber impellers, or electrical parts!!

This pump is designed to bolt directly to the propeller shaft, eliminating the need for an additional power source.  It makes sense to harness the tremendous power of the drive system during an emergency event. The impeller has no contact with the housing, so the Fast Flow pump is
100% frictionless and maintenance free.  Unlike most pumps, the Fast Flow pump is designed to run dry continuously and will pump in forward or reverse.  The impeller also acts as a flywheel or harmonic balancer and could help to reduce shaft vibration.


Limited Lifetime Warranty
Fast Flow offers a limited lifetime warranty with a free replacement pump. In addition, some marine insurance companies offer discounts for vessels with an emergency bilge pumping system.
There is no other pump on the market like the Fast Flow emergency bilge pump. See what all the buzz is about!  Contact Us for more information and a demonstration video on the remarkable abilities of our Fast Flow emergency bilge pump today!
Pump Zone
Practical Sailor
Simply put, Fast Flow can move more water out of a sinking boat faster than any other bilge pump made today.
228.475.2468
Fast Flow Pumps
Submersible Pumps Hydraulic Power Systems
© Copyright 2016 Fast Flow All Rights Reserved
Fast Flow Pump • 9700 Hwy 63 • Moss Point MS 39562
Phone: 228.475.2468
Fax: 228.475.4898
Fast Flow, LLC and Fast Flow Pump manufactured pumps are protected under: 35 U.S.C., 37 C.F.R. and 18 U.S.C.  Fast Flow, LLC and Fast Flow manufactured pumps are covered by one or more of the following patents: United States Patent Number(s): 6,942,448; 7,442,003; 8,152,443; Other Patents Pending, Domestic and Foreign