Fast Flow Pumps Oil & Gas Applications
Jet Fuel - Ingalls shipbuilding, located in Pascagoula, Mississippi, uses Fast Flow pumps to offload fuel tank compartments loaded with JP5 jet fuel on Navy ships. Fast Flow pumps are proven safe for moving diesel and jet fuel, since our impeller has no contact with the alum housing and it can run dry for extended periods of time without damage.  They have used Fast Flow 2" pumps for over 5 years.
Fast Flow Pumps at work on a natural
gas drilling rig in Pennsylvania
Fast Flow Pumps on location pumping cuttings from a gas well
Drill Rig Well Cellar Pumping - Drilling companies are using Fast Flow 4" steel pumps to move drill cuttings from the well cellar, where the bit meets the earth, to the cutting box or reserve pit. Each 4" pump can remove 600 to 800 GPM of heavy solids. Debris cages are used to protect the impeller when pumping cuttings that have substantial rock chunks.
Refinery Coke Fines Pit - Fast Flow 4” and 6” pumps are being used to pump pits filled with acidic, abrasive coke fines pooled at high temperatures reaching 160˚F to 180˚F. This severe service application has 3 difficult problems: pumping abrasive solids, pumping high temperature fluids that can melt hydraulic seals, and pumping an acidic solution that attacks pumps, pump frames, and hydraulic hose component parts. The Fast Flow pump performed significantly better than all other pumps that tried to complete this difficult project.
Reserve Pit - Drill cuttings contain frac sand and other very abrasive materials. Fast Flow pumps are excellent at moving these heavy solids becasue the pumps have no  have mechanical seals, no wear plates, and the impeller has no contact with the housing. Fast Flow pumps do not have internal friction inside the pump, which helps to minimize erosional damage. The pumps have been used at several reserve pits pumping solids to frac tanks and for loading solids into vac trucks for safe transport. The vac trucks pull and the Fast Flow pumps push, working together to fill a 120 barrell vac truck with heavy drill cuttings in only 17 minutes.
Fast Flow Pumps
Submersible Pumps Hydraulic Power Systems
© Copyright 2016 Fast Flow All Rights Reserved
Fast Flow Pump • 9700 Hwy 63 • Moss Point MS 39562
Phone: 228.475.2468
Fax: 228.475.4898
Fast Flow, LLC and Fast Flow Pump manufactured pumps are protected under: 35 U.S.C., 37 C.F.R. and 18 U.S.C.  Fast Flow, LLC and Fast Flow manufactured pumps are covered by one or more of the following patents: United States Patent Number(s): 6,942,448; 7,442,003; 8,152,443; Other Patents Pending, Domestic and Foreign